Variable Power Supply with LM7812

This project is a simple variable power supply using the famous LM7812 regulator IC. It consists of two boards, the main board which includes the regulator, capacitors, bridge rectifier and potentiometer and a second board that includes the mains tranformer, the fuse and a switch.

Description


I designed this variable power supply which is based on the famous series of voltage regulator LM78xx. The electrical characteristics can be found here. LM78xx can be easily found in stores with electronic materials.

On this project I use the LM7812 in TO-220 footprint, which can be screwed to the rear of a heatsink for better heat dissipation. You will get better heat conduction if you use thermal paste between the heatsink and LM78xx before screwed together.

The bridge rectifier is a classic 2KVV. You may choose the appropriate bridge rectifier according to your requirements.

The variable resistor R3 varies the output voltage (Vout). The R3 can be placed in your project box and can be replaced with a potentiometer of similar price.

The second board is for the transformer, the board contains the base for the primary fuse and one on-off switch for 220V mains voltage.

 

Schematics


Regulator board

 

Transformer board

The main power supply for t

PCB Design


Eagle CAD PCB layout  

 

 

3D PCB renderings

 

 

 

 

Downloads


Download project files in Eagle format

Download Regulator board Gerber files

Download Transformer board Gerber files

Comments are closed.