Adjustable 1.3-22V Regulated Power Supply

Adjustable 1.3-22V Regulated Power Supply

Circuit Description

Want a regulated voltage that can be adjusted to suit your
application? This Adjustable Power Supply is small, easy to build and
can be adapted to produce a fully regulated voltage ranging from 1.3V to
22V at currents up to 1A. This circuit come from SiliconChip Magazine

There are many fixed-voltage IC regulators available and these can be
had with 5V, 6V 8V, 9V, 12V & 15V outputs. But what if you want a
voltage output that does not fit into one of the standard ranges or if
you want to be able to easily adjust this output voltage? An adjustable
regulator is the answer – one that can be set to provide the exact
voltage you require.

This Adjustable Power Supply comprises a small PC board that utilises
a 3-terminal regulator. It does not have too many other components – in
fact, there are just three diodes, three capacitors, a resistor and a
trimpot to set the output voltage from the regulator. The circuit is
based on an LM317T adjustable voltage regulator. D1 provides reverse
polarity protection while P1 sets the output voltage.

Project looks like:

Project looks like

Parts layout:

Parts layout

PCB layout:

PCB layout

Circuit diagram:

Circuit

Parts list:

  • IC = LM317T adjustable 3-terminal regulator
  • P1 = 2k horizontal trimpot
  • R1 = 110R-0.25W
  • C1 = 100uF-25V
  • C2 = 10uF-25V
  • C3 = 100uF-25V
  • D1 = 1N4004
  • D2 = 1N4004
  • D3 = 1N4004

Comments are closed.