5.5W – 2 Channel Audio Amplifier

This project is a 5.5W – 2 Channel Audio Amplifier based on LA4445 IC.

Description


The small 2 Channel amplifier constructed around Sanyo’s LA4445 IC delivers 5.5Watts +5.5 Watts at 4 ohm load, supply in 12V DC 2Amp, Input impedance 30K.

Specifications

Dual Channels output : 5.5W
Minimum External Parts
Very small pop noise at the time of power supply ON/OFF
Good ripple rejections
Small residual noise
Built-in protectors 1. Thermal Protector 2. Overvoltage Surge Protector
Standard Audio signal
Supply 12V DC
Load : 4 Ohms Speaker on Each Channel
Voltage Gain : 50DB
Output 5.5W on each Channel (THD 10%)
Total harmonic distortion 1% Max @ Po=1W
Input impedance 30 K-ohms

 

Schematic


Parts List



 

PCB


 

Comments are closed.